Nano Particle Colloidal Silver Generator 110/120 V 1 Liter 10 ppm 3 hrs.

Description

The Nano Particle Colloidal Silver Generator introduces a breakthrough value in colloidal silver-making technology. We've incorporated features found the best selling generators to offer these incredible features at a fraction of the cost.
Included with the generator are the 12 gauge 99.99 pure silver wires, instruction booklet, and vinyl carry case. (Quart in illustration is not included with auction).
The main difference between the Nano Particle Colloidal Silver generator and other generators colloidal silver generators is
particle size
. While conventional colloidal silver generators produce silver particles that can be so large the human body has great difficulty absorbing and utilizing them, the Nano Particle Home Colloidal Silver Generator produces highly bio-available silver charged particles at a fraction of the cost of other generators. Similar Generators have manufacturers suggested retail prices between 4.95 to 9.95 or when on sale up to 0.00 off (9.95) plus shipping and handling.
(For overseas purchasers, local taxes, custom duties, import fees are the responsibility of the purchasers).
The Nano Particle Generator 100V-127V retails at 9 USD, with free shipping; for a limited time during the holidays we've lowered the price to 9.00 in the US, and at cost for international shipping. Limited supplies at this price so act quickly.
The creation of sub-microscopic silver nano particles with a colloidal silver generator bordered on the impossible at one time. The production of micro particles with the most common form of generators at that time which all used salt, baking soda, or heated water used today was impossible.  And still is impossible, the same generators are for sale today.
A review of Faraday's Principle and bit of thinking outside of the box produced generators at the turn of the 21st century produce breakthrough generators. The Nano Particle Generator builds on these principals.
To accomplish this specific goal of ultra small submicroscopic particles:
Use distilled water only.
Slow the rate of silver particle production
Prevent the agglomeration (aggregation) of silver particles into larger molecules by constant circulation of the water.
Prevent the "bridging" of silver particles between the two silver electrodes.
Limit buildup of electrical conductivity of the liquid solution during process of colloidal silver production
The Nano Particle Colloidal Silver Generator achieves this goal with a simple, easy-to-operate, low-voltage, low current DC colloidal silver generator:
Slower rate of production or patient watchful waiting.
The first
rule of making nano particle colloidal silver: the faster your unit produces silver particles, the
larger
these particles will be.
The majority standard colloidal silver generators companies sell generator designed for production in the minimum amount of time measured in minutes. Higher part per million colloidal silver concentration, rather than production smaller particle size has been the rule since before the time of Y2K. Significantly higher voltage, the addition of electrolytes (saline drops), and uncontrolled  current levels used in standard colloidal silver generators literally rip chunks of silver off the silver electrode, instead of minute particles slowly
trickling
off the silver electrode, continues as the standard.
Consequently the result of these designs produce and end product with
exponentially larger
silver particles which are difficult for the human body to properly utilize. What's more, as these larger silver ionic particles accumulate in the liquid during the colloidal silver generation along with the added saline electrolytes, the increased electrical conductivity of the liquid. This in turn increases the speed at which silver particles leave the silver electrode which subsequently produces
larger
silver particles into the liquid; a vicious cycle of ever increasing particle size.
The Nano Particle Colloidal Silver Generator utilizes a significantly longer running time (hours versus minutes) for colloidal silver production.
By limiting power and increasing the production time, the silver particles merely
trickle
off the positive silver electrode at a much slower rate and at a extremely smaller particle size
right from the start
. And these particles remain smaller throughout the entire colloidal silver generation process!
Circulation of the distilled water.
An
integral air pump efficiently aerates and circulates the colloidal silver throughout the entire colloidal-silver generation process.  The process was first described at http: www.zakairan.com in an article by
Zakairan Sheehan
dated
May 28, 2001
(with source material from
The Alternative Medicine Research Foundation, New Dehli)
The constant aeration and agitation of the water prevents and limits the agglomeration of silver ionic particles and silver in the electric field. Conventional colloidal silver generators tend to accumulate silver ions and metallic particles in the water not far from the positive silver electrode from lack of circulation of the water which limits wider dispersal of the silver particles.  Without sufficient circulation and distribution, particle agglomeration (i.e., the formation of larger silver particles through particle bonding) occurs.
Once the individual silver particles disperse throughout the liquid, their positive electrical charges dominate, and as similar charges repel, Brownian Motion takes over. From that point forward the silver ions
repel
each other and remain suspended in the solution the liquid.
The continual aeration of the water prevents electrical "bridging" which occurs between the positive and negative silver electrodes. "Bridging" simply refers to silver ionic particles caught in the electrical interplay between the two silver electrodes, accumulate there, and begin to forming larger particles and agglomerates which are harder for the body to utilize. Bridging constitutes one of biggest problems with standard colloidal silver generators production of smaller particles.
Some manufacturers of colloidal silver generators utilize a motorized, less efficient stirring methods in attempts to accomplish the same goal.
The constant aeration prevents excessive electrolysis build up in the liquid colloid. With conventional colloidal silver generator, the electrical conductivity of the entire colloidal silver suspension increases dramatically over time as more conductive silver ionic
particles
enter the water. In turn, this increased electrical conductivity causes additional silver particles to be drawn from the positive silver electrode at a faster rate and at a significantly larger size.
As the Nano Particle Colloidal Silver Generator keeps the
entire
colloidal silver super-aerated during the electro-colloidal process, the buildup of excessive electrical conductivity has been dramatically mitigated as gaseous
oxygen is one of nature's least conductive elements
.
The creation of sub-microscopic silver nano particles with a colloidal silver generator bordered on the impossible at one time. The production of micro particles with the most common form of generators at that time which all used salt, baking soda, or heated water used today was impossible.  And still is impossible, the same generators are for sale today.
A review of Faraday's Principle and bit of thinking outside of the box produced generators at the turn of the 21st century produce breakthrough generators. The Nano Particle Generator builds on these principals.
To accomplish this specific goal of ultra small submicroscopic particles:
Use distilled water only.
Slow the rate of silver particle production
Prevent the agglomeration (aggregation) of silver particles into larger molecules by constant circulation of the water.
Prevent the "bridging" of silver particles between the two silver electrodes.
Limit buildup of electrical conductivity of the liquid solution during process of colloidal silver production
The Nano Particle Colloidal Silver Generator achieves this goal with a simple, easy-to-operate, low-voltage, low current DC colloidal silver generator:
Slower rate of production or patient watchful waiting.
The first
rule of making nano particle colloidal silver: the faster your unit produces silver particles, the
larger
these particles will be.
The majority standard colloidal silver generators companies sell generator designed for production in the minimum amount of time measured in minutes. Higher part per million colloidal silver concentration, rather than production smaller particle size has been the rule since before the time of Y2K. Significantly higher voltage, the addition of electrolytes (saline drops), and uncontrolled  current levels used in standard colloidal silver generators literally rip chunks of silver off the silver electrode, instead of minute particles slowly
trickling
off the silver electrode, continues as the standard.
Consequently the result of these designs produce and end product with
exponentially larger
silver particles which are difficult for the human body to properly utilize. What's more, as these larger silver ionic particles accumulate in the liquid during the colloidal silver generation along with the added saline electrolytes, the increased electrical conductivity of the liquid. This in turn increases the speed at which silver particles leave the silver electrode which subsequently produces
larger
silver particles into the liquid; a vicious cycle of ever increasing particle size.
The Nano Particle Colloidal Silver Generator utilizes a significantly longer running time (hours versus minutes) for colloidal silver production.
By limiting power and increasing the production time, the silver particles merely
trickle
off the positive silver electrode at a much slower rate and at a extremely smaller particle size
right from the start
. And these particles remain smaller throughout the entire colloidal silver generation process!
Circulation of the distilled water.
An
integral air pump efficiently aerates and circulates the colloidal silver throughout the entire colloidal-silver generation process.  The process was first described at http: www.zakairan.com in an article by
Zakairan Sheehan
dated
May 28, 2001
(with source material from
The Alternative Medicine Research Foundation, New Dehli)
The constant aeration and agitation of the water prevents and limits the agglomeration of silver ionic particles and silver in the electric field. Conventional colloidal silver generators tend to accumulate silver ions and metallic particles in the water not far from the positive silver electrode from lack of circulation of the water which limits wider dispersal of the silver particles.  Without sufficient circulation and distribution, particle agglomeration (i.e., the formation of larger silver particles through particle bonding) occurs.
Once the individual silver particles disperse throughout the liquid, their positive electrical charges dominate, and as similar charges repel, Brownian Motion takes over. From that point forward the silver ions
repel
each other and remain suspended in the solution the liquid.
The continual aeration of the water prevents electrical "bridging" which occurs between the positive and negative silver electrodes. "Bridging" simply refers to silver ionic particles caught in the electrical interplay between the two silver electrodes, accumulate there, and begin to forming larger particles and agglomerates which are harder for the body to utilize. Bridging constitutes one of biggest problems with standard colloidal silver generators production of smaller particles.
Some manufacturers of colloidal silver generators utilize a motorized, less efficient stirring methods in attempts to accomplish the same goal.
The constant aeration prevents excessive electrolysis build up in the liquid colloid. With conventional colloidal silver generator, the electrical conductivity of the entire colloidal silver suspension increases dramatically over time as more conductive silver ionic
particles
enter the water. In turn, this increased electrical conductivity causes additional silver particles to be drawn from the positive silver electrode at a faster rate and at a significantly larger size.
As the Nano Particle Colloidal Silver Generator keeps the
entire
colloidal silver super-aerated during the electro-colloidal process, the buildup of excessive electrical conductivity has been dramatically mitigated as gaseous
oxygen is one of nature's least conductive elements
.
In short, saturation of the water with oxygen prevents excessive electrical conductivity from building up, which in turn prevents additional silver particles from being drawn from the positive silver electrode at an excessively fast rate that results in excessively large particles.
A few colloidal silver generator manufacturers solve the problem of electrolytic buildup in the colloidal silver solution by complex circuitry in the form of a "constant current regulator" to their generators. Silvergen produces an excellent constant generator for example. Constant current generators contain sensitive electronic component which are prone to damage by static electric discharges, burn out, short out from contact with water, or otherwise have issues in the long term.
More than one constant current generator manufacturer maintains that only their circuitry prevents current runaway. The Nano Particle Generator uses a simple and elegant solution to current run-away that dates back to the earliest days of vacuum tube radio. The technique, known as power limiting, uses a light bulb (or a Light Emitting Diode) and biased by resistor. Likewise, the components of the circuit in the Nano Particle Generator limit the total amount of current that could ever flow through generator. And, the discrete components are very rugged indeed, built to withstand many times the voltage and amperage that the generator would ever be exposed to.
In short, with the Nano Particle Colloidal Generator you never have to worry about whether or not sensitive electronic components has shorted out or is otherwise not working correctly due to moisture, overheating, power surges, being bumped or dropped, or for some other reason. A simple yet elegant design to produce Nano Particles.
With the Nano Particle Colloidal Silver Generator, if something ever goes wrong (and it
rarely
does), contact us, and we will fix it.
The aeration technology employed in the Nano Particle Generator keeps the silver particles
uniquely minuscule
throughout the
entire
colloidal silver-making process. You don't get progressively larger silver particles during the colloidal silver-making process, because the aeration suppresses excessive electrical conductivity throughout the entire process.
A number of other factors make the Nano Particle Generator superior to conventional colloidal silver generators; the above-described factors are the most important ones. Home colloidal silver production has come a long way in the 20 years. The Nano Particle Generator simply cannot be matched for its price.